AC Installation in Kirby - Written Fixed Price, Set Install Date

Fast, Reliable AC Installation Across Kirby

A full AC installation in Kirby typically runs $3,500 – $7,500, and the job usually takes one to two days once equipment arrives. If your current system is over 12 years old, struggling to cool the older rooms of your home, or tripping the breaker in July, call (254) 271-2545 and Luis Serrano will walk you through the options. We know the houses here: the 1960s brick veneer ranches off Ackerman Road, the pier-and-beam originals east of Old Seguin Road, the newer slab-on-grade subdivisions on the east side. Each one calls for a different approach, and we size and install for the house in front of us, not the house on a spreadsheet.

Call (254) 271-2545

Why Meadowsweet Heating and Air San Antonio Is Kirby’s Preferred AC Installation Company

Homeowners in Kirby call us because we show up when we say we will, with background-checked, uniformed crew members who follow the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. The price part matters. You get a written number before any tool comes off the truck, every visit, every time. If we miss something or the system doesn’t perform, our 365-Day Done Right Promise means we make it right. No runarounds, no fine print.

We’re part of the Cedarwell family of HVAC companies, founded in 2004. That means support, parts access, and training that an independent one-person shop can’t match, while still being able to act quickly for a house on Ackerman Road or Ackerman Place. A live person answers our phone 24 hours a day, 7 days a week. No voicemail queue. If it’s 2 a.m. and your AC died during a Kirby heat wave, you talk to a human.

For this page, think about your floors and your pets. Our technicians lay drop cloths and wear shoe covers on every install. Before the crew leaves, we photograph the clean-up. It’s included on every job, not an upsell. When we work around kids and animals, we keep drop cloths between the work zone and the play area. We use pet-safe sealant and mastic. Quiet tools during nap hours if you tell us. That’s not a policy memo; it’s a habit built into the Cedarwell Care Promise.

Furnace Installation in Kirby

Furnace Repair - Kirby and installation usually applies to the original gas furnaces still sitting in closets in homes built between 1950 and 1975. These systems have served their time, but a new high-efficiency furnace paired with a modern AC changes what your home can do. A full furnace installation in Kirby typically runs in the $3,500 – $7,500 range when paired with a new AC, and on its own the work includes removing the old unit, inspecting the flue, sealing the transition, and confirming the gas pressure and static pressure before we leave.

Older Closet Furnaces Need a Real Look

Along Ackerman Road and the older streets east of Old Seguin Road, original 1960s gas furnaces still run in closets, sometimes with asbestos duct wrap still present. We carry a roll of mastic and a camera on every install, and we check the heat exchanger for cracks before the first cold snap, not after. If the wrap is present and intact, we don’t disturb it. We encapsulate or work around it, and we tell you exactly what we found.

Panel and Duct Check Before the Swap

Kirby’s furnace installs often stall on the electrical panel. A 60-amp pushmatic panel from the 1950s cannot handle a modern furnace blower plus the AC condensing unit at the same time. We check that before quoting, and the panel work is priced separately with a written number: $350 – $1,200 depending on what’s there. We don’t jump a breaker to finish a job. We size the electrical correctly.

HVAC Installation in Kirby

HVAC Installation in Kirby means the whole system, not just the box outside. A new AC condenser on original 1960s flex-duct runs is a common reason installs underperform here. We run a static pressure test before we quote full HVAC work, because a modern blower pushing against collapsed or undersized duct will trip the limit switch or whistle at the registers. Full HVAC installation with a new furnace and AC runs $3,500 – $7,500, depending on what the house actually needs.

Duct Sealing and Mastic Work

Duct sealing and mastic work with AC installation runs $150 – $650 in Kirby. That’s not an add-on we pitch; it’s often the difference between a system that cools and one that freezes its evaporator coil. On a 1963 brick veneer ranch on Ackerman Road, our crew replaced a 1990s Goodman 2-ton split and found the original ducts had collapsed under pier-and-beam settling. We ran a static pressure test before quoting, found 0.9″ w.c. on the return side, and upsized the return plenum and added a media filter cabinet so the new Rheem heat pump could move enough air through the unbalanced floor plan without freezing the evaporator coil. That’s the work you pay us to know how to do.

Line Sets and Clay Soil

Kirby’s clay-heavy soils shift. On slab-on-grade homes east of Old Seguin Road, refrigerant lines run through walls that settle differently than the concrete pad. A tight new coil can crack at the flare fitting within a year if the line set isn’t re-pitched properly. We re-pitch or replace line sets on installs where the slab has moved, and we include that in the written price before any work starts.

Trusted Brands We Service in Kirby

We install and service Rheem, York, Daikin, and Bryant equipment, alongside Carrier, Trane, Lennox, Goodman, and American Standard. Because Kirby sits close to the San Antonio parts supply chain, we can often get OEM parts same day rather than waiting on a regional warehouse. For a Kirby home with a 2-ton Daikin or a York heat pump kit, that means less downtime during a heat wave. We don’t push one brand. We match the equipment to your ductwork, your panel, and your floor plan, then price it in writing.

Common AC Installation Problems We See in Kirby Homes

• Undersized duct runs on original pier-and-beam homes. East of Old Seguin Road, flex ducts sized for a 1960s furnace blower can’t move the air a modern blower demands. Your new AC won’t cool evenly, and the blower motor fails within two summers.
• Clay-shift stress on slab homes. Kirby’s clay soil expands and contracts with moisture. Refrigerant lines that run through exterior walls can crack at the flare fitting within a year if the line set isn’t re-pitched during installation.
• 1950s electrical panels. Original 60-amp pushmatic panels can’t handle a modern heat pump strip kit. We inspect the panel before we quote, so you’re not left with nuisance trips every cold snap.
• Like-for-like tonnage swaps that mask duct leaks. A bigger condenser on the same leaking ducts drives static pressure high enough to whistle at the registers and freeze the coil. We won’t do that. We measure first.

Pricing for AC Installation in Kirby, TX

We Also Serve Cities Near Kirby

Our crews cover Kirby and the surrounding communities: San Antonio, New Braunfels, Converse, and Live Oak. If you’re in one of those cities and scheduling an AC Installation, you get the same written pricing and C.A.R.E. standards. We coordinate dispatch from the San Antonio area, and our AC Installation in Kirby team knows these streets well.

FAQs About AC Installation in Kirby